LED floodlight installation tips and precautions

Release time:2019-05-11
Abstract:

Although the LED floodlights are easy to install, some […]

Although the LED floodlights are easy to install, some installation tips and needs to be noted, this is a supplement to the advantages of LED floodlights. Buying lamps with fixing screws, the installation is relatively simple, elaborate: the materials needed: LED guardrail light clips, transformers with waterproof function, sub-controllers, the steps are as follows:
1, install the guardrail, punch holes in the wall, arduous according to the actual requirements, usually within 3 cm,
2, do anti-static measures, such as the workbench to be grounded, workers wear the corresponding electrostatic clothing, anti-static measures, because different grades of LED floodlights of different quality, anti-static ability is different.
3, installation attention to sealing, poor sealing, diameter affects the service life of LED floodlights
4, LED floodlight wiring is preferably no more than 25 cm, the transformer power can be lengthened accordingly, otherwise it will affect the brightness
LED floodlight installation precautions
1, try to use the series LED form, because the LED floodlight voltage difference is special. The peak current of ordinary LED is maintained at 80 mA, and the reverse voltage is above and below 6V. When designing the circuit, pay attention to the peak voltage and current at this limit.
Use a voltage of 25 watts or less for soldering. The soldering iron only controls the SMD LED exposed at a high temperature below 300 degrees Celsius. Do not squeeze the epoxy part of it, or wipe it with a hard object because the LED lamp is very fragile. Very easy to damage, welding time is 3 seconds. LED floodlights are widely used, so the installation tips and precautions are very important. LED is a new light source. Under the correct installation mode, it can ensure the stable operation of LED floodlights for a long time.